Home > Connecting Internet > Problem when using wvdial

Problem when using wvdial

June 10th, 2008
Goto comments Leave a comment

When using wvdial for connecting to Internet through a Airtel gprs, with a gprs enabled mobile, if the wvdial program continuously tries connecting and fails …. Add the following line in the /etc/wvdial.conf file

Init3 = AT+CGDCONT=1,””,”airtelgprs.com”

where airtelgprs.com is the accesspoint of Airtel

Hence the etc/wvidal.conf will look like

[Dialer Defaults]
Init3 = AT+CGDCONT=1,””,”airtelgprs.com”
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = USB Modem
ISDN = 0
New PPPD = yes
Phone = *99***1#
Modem = /dev/ttyACM0
Username = ” “
Password = ” “
Baud = 460800

Connecting Internet ,

  1. aify
    September 28th, 2008 at 20:50 | #1
    Reply | Quote

    hi..plz tell me the details…how to config the dailer….4m start….i hav activeted airtel mobile office today n asked the dailer config 2 the coustomer care but they didnt helped me out, my 20 buks wasted….ny way plz tell me the detail process…n how to activate the week mobile office…. wat should be the minimum balance?

    plz send the detail information to my email id;

    aify@rediffmail.com

    thanks in advance

  2. Rosario
    September 28th, 2008 at 23:51 | #2
    Reply | Quote

    Check this out for how to connect
    http://linuxmonk.wordpress.com/2008/06/10/connecting-to-internet-through-airtel-gprs/
    If any problem in connecting comment here with the error msg,

    And for activating mobile office for a week, sms GPRS7 to 56789.

  1. No trackbacks yet.